Timber 2012/2013

Hsc key project folio

Research

Ergonomics

How efficient will it be in a office?

I have taken into consideration that I am a bit tall than other people, and after testing all units in my property they ranged from 900 logistik to 950 mm and for me personally I considered these to be to small. Which can be the reason I have chosen to make it to 1000mm.

Design

How did I come up with the design and why?

Formerly I began looking on the Internet and browsing through photos but there was just a lot of options and i also would not have known tips on how to begin thus, making them. During each of our theory lessons at school the teacher brought a few magazines into the classroom, following reading through and having some ideas We finally found a cabinet that captured my own attention equally because of the amazing look plus the complexity from it, my style I very similar to the one that was in the mag. I chose to make a cabinet as I noticed that a particular cabinet at my house is extremely bland and is also starting to deteriorate due to its old age.

Timber Collection

What timber did I personally use and how come?

For the legs of my major project I have used Sydney Green Gum since it is a wood timber that is certainly more than capable of keeping my job upright and in addition as I include used it prior to and have noticed how this finishes.

Glues

What Glue/s have We used and why?

Poly Vinyl Acetate (PVA) is the most common stuff that I will be using as it is fast drying, dries very clear, creates a solid bond among both wood surfaces and is also easy to work with.

Hardware

What hardware has become used and why?

Important joints

What joints have I actually used and why?

Time Management Program

Week| Monday| Tuesday| Wednesday| Friday

1| Creating Project – SketchingTheory| Designing Project – Sketching Theory| Designing Task – Adding DimensionsTheory| Choosing Timbers – Bought Green Gum timber for LegsTheory | 2| Cut out thighs 45mm Back button 45mmEach 1000mm long| | Marked and cut initial curve about front legs| Roughly sanded curves with drum sander| 3| Marked and cut out second shape on front legs| Approximately sanded curves with trommel sander| Trouble – Among the curves was out drastically, new calf had to be manufactured. | Cut out new calf and slice curve on a single side| 4| Cut second curve on leg and sanded in drum sander| | Key Project Stock portfolio explained and examples shownTheory| Cut every legs to precisely 1000mm| 5| Commenced sanding legs with eighty grit sandpaper| Sanding thighs with 85 grit sandpaper| Sanding legs with 85 grit sandpaper| Sanding hip and legs with 70 grit sandpaper| 6| Sanding legs with 80 resolution sandpaper| | |

7| | | |

8| | | |

9| | | |

10| | | |

Materials List

Material| Length (mm)| Thickness (mm)| Thickness (mm)| Believed Cost| Cost| Sydney Green Gum (Legs & Top)| 1200| 300| 45| $90| $137| Jarrah (Door Frames)| | | 15| $45|

Maple (Draw Fronts)| 800| 140| 20| $20|

MDF (Back)| 900| 480| 3| |

| | | | |

| | | | |

Statement of intent

During this year and then I consider designing and constructing a modern wooden cupboard.

It will include two drawers up the top of the job and two doorways with goblet panels in them below.

Let me make it perfectly with minimal difficulties or challenges. I want to achieve this using my original designs of course, if need be little alterations could be made to guarantee the job is up to a suitable common.

For the legs and the top of my job I intend on using Sydney blue chewing gum as in prior years I have used it and personally I do think it has a nice colour and finishes very well. For the framing in the doors My spouse and i plan on employing some Jarrah as I think it will mixture well while using Sydney green gum and supply an amazing distinction of colors. For the pull fronts We plan on by using a lighter material such as maple because it adds another color that I believe will look good. I as well plan on putting frosted cup...

Tags:

Motivation and the Brain Dissertation

Square Group Essay